8
Ariel´s Crown.

If you are going to throw a Little Mermaid Themed Party, these Crowns will be Perfect for the Girls. 

You´ll need:

- Headbands.
- White Tulle.
- Golden Foamy. If you don´t get this colour, use yellow foamy and golden paper (wrap the foamy with the paper).
- Precious stones to decorate.
- Hot glue gun or white glue.
- Crown template. (Click here to download it.).

Cut tulle strips about 15 X 60 cms. You´ll need five for each headband. Tie the tulle strips from the middle towards the ends, as it is shown in the pictures.

Tulle Strips.Tulle Strips.

When all the strips are tied up, decorate the tulle with precious stones. 

Use the template to cut out the crown shape and glue it to the headband. The lower part of the crown should be glued to the headband. Girls shouldn´t wear the headbands over the head, but on the hairline. Therefore, the ends of the headband will be placed horizontally. Headbands won´t fall down due to the tulle.   

From familygo

Post a Comment

  1. I'm happy about everything you bring it very interesting and helpful douchebag workout 2, thanks

    ReplyDelete
  2. I think it is a good idea, I have thought of it but not as detailed as you.
    Escape From Aztec

    ReplyDelete
  3. The content of your article page Click skiing beauty to play, I find the content quite interesting and useful to me, thank you for sharing

    ReplyDelete
  4. That's good. Thanks a lot. It's helpful much abcya

    ReplyDelete
  5. Make your own seashell mermaid crown! ... There is nothing as enchanting as a crown covered in shells!

    site

    ReplyDelete
  6. Eliminate any tapes or materials for bundling consequently. Open the section plate and open the tapes on paper width and longitudinal markers. 123.com.setup Stretch out the piece of paper to the most extreme limit. Take the new plain white paper pack and burden it into the info tray. Drag the markers with the goal that the sheets are tight, however not very close. Whenever you're done, close the paper tray. To try not to print wrong records, adjust ink cartridges. Setup on the scanner is finished. Take the defensive plate on the glass of the scanner. Clean the glass and keep up with the forward looking setup plate. Ensure that the archive is set on the essences of the scanner glass as indicated by the setup markings. Pick OK and delay until the printer is in setup.

    ReplyDelete
  7. It takes a lot of effort or how can I use this site https://rankmywriter.com/masterpapers-com-review an online assistant who performs any written work to order quickly and efficiently for everyone who wants to get good grades and, most importantly, work at a small price

    ReplyDelete
  8. It is a good site post without fail. Not too many people would actually, the way you just did. I am impressed that there is so much information about this subject that has been uncovered and you’ve defeated yourself this time, with so much quality. Good Works!
    바카라
    토토

    ReplyDelete

 
Top